EPD RSL
Third-Party Verified EPD · EN 15804+A2 / ISO 14025

Our lowest
carbon steel yet.

Reinforcement Solutions Limited (RSL) is pleased to announce a new, independently verified Environmental Product Declaration for our reinforcing steel - and the numbers speak for themselves.

A1 Emissions · Ex-Steelworks (GWP-total)
0
kg CO₂e / tonne of reinforcing steel
Declared unit: 1 tonne fabricated steel We can go significantly lower per contract
Cradle To Gate · Modules A1–A3

Where the carbon comes from

Almost all of the footprint sits upstream, at the mill. Once the steel reaches Cannock, our own fabrication - cutting, bending and welding - adds very little on top.

A1 · Raw Material
A2 ·
Transport
A3
A1 - Raw material (mill production)
342 kg CO₂e
87.7% of the total - sourced from four European mills
A2 - Transport to Cannock
35.7 kg CO₂e
9.2% of the total - sea & road freight to the UK
A3 - RSL Fabrication
12.3 kg CO₂e
3.1% of the total - cutting, bending & welding on site
Verified Cradle To Gate Performance
390
kg CO₂e / tonne of reinforcing steel

GWP-total, cradle to gate (A1–A3)

Our independently verified Environmental Product Declaration confirms a total global warming potential of 390 kg CO₂e per tonne across product stages A1 to A3.

Traceable Supply Chain

Sourced from mills, verified end to end

Each mill's own supplier-specific EPD data feeds directly into ours, so every tonne we fabricate is backed by real, audited figures - not industry averages.

Independently Verified

No estimates. No self-marking.

This EPD was independently verified by EPD Hub in accordance with ISO 14025, EN 15804+A2 and the EPD Hub Core PCR.

ISO
14025
VERIFIED
EPD Number: HUB-6452 Reference Standard: EN 15804+A2 Verifier: Elena Antuña-Bernardo, EPD Hub Author: Dr Nathan Wood, Tunley Environmental Published: 25 May 2026 Valid Until: 25 May 2031
Our Sustainability →
Project-Specific Options

342 is our standard.
It isn't our limit.

By adjusting mill sourcing and mix for your specific contract, we can push these figures significantly lower. Tell us about your project and we'll show you what's possible.